Recorded presentation9.4
Comparisons of Cirrus cloud statistics derived from CALIOP spaceborne lidar and MODIS measurements
Sebastien Berthier, SSEC/Univ. of Wisconsin, Madison, WI ; and A. Heidinger, P. Chazette, and B. Baum
ABSTRACT
An important objective of climate research is to understand the impact of clouds and aerosols on the global radiation budget. Indeed, clouds and aerosols have a significant influence on the Earth's radiative balance and induce various climatic feedbacks that are still not completely understood. The spatial heterogeneity of cloud structures and their microphysical properties significantly contributes to the modulation of the Earth's energy budget. Moreover, the surface flux distribution in longwave radiation is very sensitive to both the geometrical structures and cloud base altitude. A better knowledge of the three-dimensional distribution of cloud layers is then required to improve cloud parameterizations in climatic models.
Systems including spaceborne backscatter lidar systems (such as LITE (NASA, 1994) [1], ICESat/GLAS (NASA, 2003) [2] and CALIPSO/CALIOP (NASA&CNES, 2006) [3] provide the potential for new insights into the vertical distribution of clouds and aerosols in the atmosphere. Additionally, they offer an opportunity to better determine the presence of optically thin targets such as cirrus clouds, but the analysis of optically thin targets must account for the signal to noise ratio characteristics of the sensor. For lidar systems operated in space, atmospheric backscattered signals present reduced signal to noise ratios (SNR) in comparison with ground-based systems.
Cloud vertical structure (height/pressure/temperature) has become a well studied and often used product from MODIS. It is also a standard product from the VIIRS (Visible Infrared Imager Radiometer Suite) instrument on board the future National Polar-Orbiting Operational Environmental Satellite System (NPOESS) satellites.
Indeed, with the launch of CALIPSO and CloudSat in EOS A-Train, NASA has provided us a new opportunity to evaluate the characteristics of cloud remote sensing from passive instruments.
The matched CALIOP nighttime spaceborne lidar database and the MODIS/Aqua are used here to investigate cloud structural parameters, in particular the cloud top height (CTH) and the cloud chord length (CCL).
THE CALIOP MEASUREMENT PROCESSING
The cloud characteristics are first obtained since the lidar measurements. To complete this objective, an algorithm, yet developed and applied in the view of the processing of the LITE lidar measurements [4] has been applied now to the CALIOP lidar measurement. The LITE database is limited to 10 days. Our interest is to adapt and apply this algorithm to the CALIOP database, to ultimately build statistics on a multi-year time scale.
This algorithm is based on a 2-step method. In the first step, a threshold method is used to infer the cloud structures in an atmospheric column to account for the potential presence of multilayered clouds.
In the second step, a cloud pattern recognition method is applied to treat a cloud as an isolated object, for which we can attribute parameter such as length, geometric thickness (until the signal attenuates), and cloud top (and possibly cloud base) altitude. Then, cloud layers are tested following their proximity to other structures. If the objects are sufficiently close together, they are merged into a single object [5].
THE MODIS MEASUREMENT PROCESSING
MODIS provides multiple infrared channels that allow for the estimation of the cloud-top pressure, emissivity and microphysics. We will first characterize the performance of the standard MODIS cloud top pressure products using the information provided by CALIOP. In addition, we will derive cloud emissivities values from each MODIS IR channel. From the spectral variation of the emissivity values, we will infer the cloud microphysical properties. This will allow us to study the spatial variability of cloud microphysics and its correlation with the CALIOP information. Lastly, we study the impact on IR cloud retrievals due to the absence of infrared absorption bands on the NPOESS/VIIRS sensor.
As a second product the Cloud Chord Length (CCL) distribution could also be extracted from the MODIS data. The cloud mask product [6], associated to the phase function process [7], help us to retrieve this parameter.
COMPARISONS
We derive, from CALIOP and MODIS measurements, the cloud probability density functions (CPDF) of CCL and CTH.
Such an approach highlights the potential in using active lidar data to investigate and retrieve cloud parameters at the global scale.
This study also aims to improve the existing method to retrieve cloud characteristics from passive instruments.
The results of this study may be of interest not only to radiation budget studies but also to chemistry transport models because of the effect of clouds on photolytic rates.
REFERENCES
1. Winker D.M., R.H., Couch, and M.P., McCormick, 1996: An overview of LITE: NASA's Lidar In Space Technology Experiment, Proc. IEEE , 84, pp. 164-180.
2. Palm S.P. and J. Spinhirne, 1998: The detection of clouds, aerosol and marine atmospheric boundary layer characteristics from simulated GLAS data. The 19th International Laser Radar Conference, Annapolis, Md, July 6-10, 1998.
3. Winker D. M., J. Pelon, and M. P. McCormick, 2002 : The CALIPSO mission: Aerosols and cloud observation from space, Proc. ILRC 21, L., Bissonnette, G., Roy, G.Vallee, Ed., pp. 735-738.
4. Berthier S., P. Chazette, J. Pelon and B. Baum, 2008: Comparison of cloud statistics from spaceborne lidar systems, accepted for publication in ACPD in January 2008.
5. Berthier S., P. Chazette, J. Pelon and B. Baum, 2008: cloud statistics derived from spaceborne backscatter lidar profiles using the agglomeration method, . The 24th International Laser Radar Conference, Boulder, Co, June 23-27, 2008.
6. Ackerman, S. A., R. E. Holz, R. Frey, E. W. Eloranta, B. Maddux, and M. J. McGill (2008), Cloud detection with MODIS: Part II Validation, Journal of Atmospheric and 657 Oceanic Technology, Accepted.
7. Baum, B. A., A. J. Heymsfield, P. Yang, and S. T. Bedka, 2005a: Bulk scattering models for the remote sensing of ice clouds. 1: Microphysical data and models. J. Appl. Meteor., 44, 1885-1895.
Session 9, Satelite Studies and Lidar Observations - II
Thursday, 15 January 2009, 11:00 AM-12:00 PM, Room 122A
Previous paper Next paper